1Lift the wiper arm
Pull the arm up off the windshield until it stays upright. Some cars need the wipers in 'service position' first (see manual).
FREE REPAIR GUIDE
How to Replace Wiper Blades
Replace your windshield wiper blades in 5 minutes. Sizes, connector types, and how not to crack your windshield.
DIFFICULTYVery easy
ESTIMATED TIME~5 min
TOOLSNone
POTENTIAL SAVINGS$20–40Labour estimate · varies
Know what you’re replacing.
Streaks, squeaks or skipping mean your wipers are worn. Most blades clip onto a J-hook arm and swap in about five minutes. Replace them every 6–12 months.
What you’ll need.
Wiper blades (driver + passenger)Sizes differ per side — look up by vehicle · ~$20–45
View on Amazon →
Rear wiper bladeIf your vehicle has one · ~$10
View on Amazon →As an Amazon Associate, RepairAI may earn from qualifying purchases. Confirm fitment for your exact year, engine and trim before buying.
A little preparation first.
- Look up the driver and passenger sizes — they're usually different.
- Put a towel on the windshield in case the arm snaps back.
One step at a time.
2Press the release tab
Find the small tab where the blade meets the arm and press it.
3Slide the old blade off
Slide the blade down and off the J-hook.
4Attach the new blade
Slide the new blade's adapter onto the hook until it clicks.
5Lower the arm
Lower it gently onto the glass — never let it snap back.
Log in 
Troubleshooting
New blade streaksClean the windshield with glass cleaner and wipe the rubber edge.Blade won't click onUse the correct adapter for your arm type.
FAQ
How often to replace?Every 6–12 months, or when they streak.Beam vs conventional?Beam blades work better in snow and at speed.
General guidance only. Procedures vary by year, engine and trim; if unsure, consult a qualified mechanic or your owner’s manual.